Skip to main content

Call Us: Oregon and SW Washington: (503) 353-0100: Contact Us | Business Hours: 7:00 AM to 5:00 PM Mon-Fri

For Oregon & Southwest Washington contractors

Daikin VRV equipment. Support for your next project.

Work with Mar-Hy on Daikin Variable Refrigerant Volume equipment, controls and project supply needs. Start with the building, the job and what you know—we’ll help you identify the equipment information needed for the next step.

New project, tenant improvement or existing system? You don’t need a finished equipment schedule to start a conversation.

Daikin VRV EMERION R-32 outdoor equipment
Daikin VRV EMERION R-32 family image. The selected model and complete system configuration depend on the project.

Daikin VRV EMERION / R-32

Choose the system around how the building operates.

Heat pump and heat recovery serve different operating needs. We can help you identify which family to discuss with your design and installation team, then work through equipment, controls and sourcing.

RXYA · Heat pump

Zones with a common heating or cooling mode

Consider the heat pump architecture when zones on a refrigerant system can operate in the same heating or cooling mode. Individual room temperature control does not mean simultaneous heating and cooling.

Find RXYA heat pump documents

REYA · Heat recovery

Different zones heating and cooling at once

Discuss heat recovery when the building needs simultaneous heating and cooling in different zones. Include the applicable branch-selector equipment, indoor combinations and control requirements in the system review.

Find REYA heat recovery documents

Other Daikin VRV architectures, including compact and water-cooled systems, have their own application requirements. Ask our team about the right product route for your project; a family reference is not a stock or compatibility confirmation.

Start with what you know

We’ll help you work through the equipment details.

Tell us where the job is, how the space will be used and whether you’re planning a new installation or working on an existing system. Share a model number, equipment schedule or project notes if you have them.

Mar-Hy can help with product information, manufacturer documents, related components and current sourcing. Your design and installation team confirms loads, site conditions, system design and applicable installation requirements.

Project details we can help you identify
  1. Building use and zones. Room loads, occupancy schedules and design conditions belong with the design team’s selection.
  2. Heating and cooling needs. Identify spaces that may need different operating modes at the same time.
  3. Indoor approach. Consider wall-mounted, cassette or concealed-ducted units, airflow, service access and condensate routing.
  4. Layout and power. Equipment locations, piping routes, vertical separation and electrical service affect the proposed configuration.
  5. Controls and interfaces. Include room controls, scheduling, central control and any building integration.
  6. Model generation and installation scope. Confirm the exact refrigerant generation, approved combinations and manufacturer installation provisions for the selected equipment.

Useful resources, close to the equipment

Find the documents for the system you’re working on.

Working on an installed system?

Start with the model. Keep the generation clear.

Send the complete outdoor and indoor model numbers, installed controls and the issue you’re investigating. A clear nameplate photo is useful when a model or suffix is uncertain.

Earlier-generation VRV equipment needs its own manuals and parts references. Don’t assume that a newer outdoor unit, indoor unit, controller or refrigerant is interchangeable with the installed system.

Equipment or service parts support

We’ll help identify the appropriate product-information route and check sourcing for the equipment or parts you need.

One Milwaukie location / Regional contractor support

Daikin VRV supply support for Oregon & Southwest Washington.

Mar-Hy Distributors is at 3850 SE International Way, Milwaukie, Oregon. Contact our team about your project location, equipment needs and current sourcing. The city links below lead to local HVAC supply information.

Some areas we serve

Find local HVAC supply information for your area. For a VRV project, talk with our Milwaukie team about the equipment, controls and related materials you need.

Browse more service areas

Daikin VRV supply questions

Do I need a complete equipment list before contacting Mar-Hy?

No. Start with what you know about the job and share any models, plans or equipment notes you have. We can help identify the product information needed for the next step.

Can every VRV system heat and cool different rooms simultaneously?

No. That depends on the architecture. Discuss heat recovery when simultaneous heating and cooling is required, and confirm the complete selected configuration using manufacturer guidance.

Can existing indoor units be reused with a new outdoor unit?

Do not assume cross-generation compatibility. The complete indoor and outdoor models, refrigerant, controls and manufacturer-approved combinations need review.

Do the city links represent Mar-Hy branches?

No. Mar-Hy has one location in Milwaukie. The links describe areas we serve and help contractors find relevant supply information. Contact us about your job location and sourcing needs.

Does Mar-Hy install or design the system?

Mar-Hy supports contractors and trade purchasers with equipment sourcing, product information and related resources. Your project’s design and installation team remains responsible for design, site conditions and installation requirements.

Have a VRV job in mind?

Tell us what you’re working on. We’ll help you find the next equipment step.