Gibson / Contractor equipment reference
A contractor reference for the 95% AFUE, two-stage upflow/horizontal furnace family, with full-model specifications and manufacturer literature.
Plan the equipment around the job
A furnace quote needs more than the high-fire input number. Confirm the load, cabinet fit, available airflow, venting route and any paired cooling coil before selecting the complete KG7TC model.
The specifications publish high- and low-stage gas input separately from heating output. Use the proper figure for the question being answered; AFUE is a seasonal efficiency rating, not an instruction to estimate every operating output.
The cooling-airflow code identifies a selection range, not the airflow delivered at every static pressure. Check the exact blower configuration and manufacturer table for the coil, ducts and required operating mode.
Verify height, depth, supply/return transitions, service space, venting, combustion-air provisions and condensate routing. Those job details can change the materials and installation scope even when the furnace width looks familiar.
The numbers contractors need
Compare the listed full models, or select one for a focused view.
2 model references · confirm current sourcing and availability with Mar-Hy.
| Reference | KG7TC-060D-E24BP60,000 Btu/h high-fire input | KG7TC-080D-E35CP80,000 Btu/h high-fire input |
|---|---|---|
| Furnace model | KG7TC-060D-E24BP | KG7TC-080D-E35CP |
| Heating stages | Two | Two |
| AFUE (%) | 95 | 95 |
| Gas input — high / low (Btu/h) | 60,000 / 39,000 | 80,000 / 52,000 |
| Heating output — high / low (Btu/h) | 57,000 / 37,000 | 76,000 / 49,000 |
| Power supply in specification | 120 V · 60 Hz | 120 V · 60 Hz |
| Cabinet H × W × D (in.) | 34-1/2 × 17-1/2 × 28 | 34-1/2 × 21 × 28 |
| Blower motor H.P. / type | 1/2 · BLDC / ECM | 3/4 · BLDC / ECM |
| Motor full-load amps in reference | 6.4 | 8.8 |
| Rated external static pressure (in. w.c.) | 0.50 | 0.50 |
| Listed temperature-rise range (°F) | 30–60 | 35–65 |
| Shipping weight (lb) | 120 | 130 |
| Gas connection | 1/2 in. N.P.T. | 1/2 in. N.P.T. |
Source: Gibson / Nortek 468F-0725 — pages 3–4, dimensions and specifications. Reviewed November 10, 2026.
The 95% AFUE figure describes the furnace’s listed heating-efficiency reference. A paired air conditioner or heat pump has its own complete-system rating. If the job includes cooling or dual fuel, confirm the outdoor unit, indoor coil and furnace combination separately and use the official AHRI record where applicable.
Read it. Save it. Bring it to the job.
Open the manufacturer reference you need. Documents load when selected.
Search KG7TC references in the Mar-Hy document library
Read the manufacturer warranty and registration information in the applicable Gibson literature. Verify application eligibility, terms and labor coverage rather than treating a family headline as a complete warranty agreement.
Get a useful quote on the first conversation
It is the high-fire gas input for the listed 060 model. The manufacturer separately lists 57,000 Btu/h high-stage heating output under its stated rating conditions. Preserve that distinction when quoting or comparing equipment.
No. It is a selection identifier. Actual delivered airflow depends on the speed/configuration and external static pressure; use the manufacturer’s matching blower table and the system requirements.
Only when the document’s scope includes that complete model and revision. This chart covers KG7TC, not an automatic substitution for KG7SK or KG7TN references.
Find it at Mar-Hy
Use the model lookup below, or ask our team to confirm sourcing, current contractor pricing and availability. Mar-Hy serves contractors in Oregon and Southwest Washington from Milwaukie.
KG7TC-060D-E24BP
Look up model in the shopConfirm current price and availability in the store.
KG7TC-080D-E35CP
Look up model in the shopConfirm current price and availability in the store.
Find KG7TC equipment documents
Explore Gibson equipment through Mar-Hy
View Mar-Hy contractor training