Skip to main content

Call Us: Oregon and SW Washington: (503) 353-0100: Contact Us | Business Hours: 7:00 AM to 5:00 PM Mon-Fri

Equipment & products / MAR-HY ARTICLES

Choose Indoor Air Quality Products by the Pollutant and the Evidence

Originally published November 6, 2025
Updated November 5, 2026 4 min read

An indoor-air-quality product should address a defined concern in a particular space. A filter, gas-treatment device, ventilation system, and air-quality monitor do different jobs. Start by identifying the concern, then compare the product’s tested function, installation requirements, limitations, and maintenance.

Begin with the source and the space

Record what prompted the inquiry, where it occurs, when it occurs, and what has changed. An odor, visible dust, moisture problem, or monitor reading needs context before it becomes a product recommendation.

EPA’s indoor-air-quality overview distinguishes source control, ventilation, and filtration. A product should fit the broader approach rather than being presented as an answer to every pollutant or building condition.

For an illustrative inquiry, a dusty room and a persistent odor should not automatically receive the same equipment recommendation. Determine what evidence supports the concern and which qualified assessment or source action is needed.

Understand what a particle-filter rating describes

MERV describes particle-capture performance over specified particle-size ranges. EPA’s MERV explanation provides the rating context. The number is not a universal measure of gas removal, whole-room air quality, or protection against illness.

A filter must also fit and work with the actual HVAC system. Have the responsible technician review the selected filter, housing, airflow, and manufacturer requirements. A higher rating alone does not establish a suitable replacement.

Keep the replacement and inspection plan practical. Identify the exact filter, how the owner obtains it, and what condition or interval the applicable instructions specify. A product recommendation without a maintenance plan is incomplete.

Ask what the air cleaner was tested to do

Request the exact model, target pollutant, test method, conditions, result, and limitations. Distinguish a laboratory result from performance in a furnished, occupied room with ongoing pollutant sources.

Ask whether the evidence applies to the complete device and intended operating setting. A test involving one component or a different configuration should not silently become a claim for every application.

Compare the required space, airflow, noise at the intended setting, installation, consumables, and service requirements. A feature that the owner cannot use as intended may not deliver the result assumed in the proposal.

Examine ionization claims carefully

EPA describes bipolar ionization as an emerging technology with less field evidence than established filtration, and notes the potential for ozone and other byproducts. A general claim that all such devices produce no ozone is unsupported.

EPA recommends UL 2998 certification if a bipolar-ionization device is chosen. Evidence about ozone emissions should not be expanded into a claim that every pollutant is removed or that illness is prevented. Review the exact certification and separate efficacy evidence for the specific model.

Do not use ozone generators in occupied spaces; EPA specifically advises against that use. Keep the product’s actual technology and instructions visible rather than grouping every device under the same “purifier” label.

Use monitors to answer a defined measurement question

A monitor reports the pollutants or environmental quantities its sensors measure. It does not measure everything in the air. Temperature, humidity, particle concentration, and carbon dioxide are distinct quantities.

EPA’s low-cost monitor guidance explains benefits and limitations. Review the sensor specification, placement, maintenance, units, and data interpretation before relying on the result.

A single reassuring value does not establish that every pollutant is controlled. Similarly, a change in one reading needs context before it is treated as proof that an air cleaner resolved the original concern.

Give the customer a specific proposal

  1. State the concern. Identify the space, observation, and evidence supporting the proposed action.
  2. Explain the function. Say which pollutant or condition the product addresses and how its evidence applies.
  3. Define the installation. Include system compatibility, setup, and qualified verification responsibilities.
  4. Explain upkeep. Identify consumables, inspection, cleaning, and service requirements from the applicable instructions.
  5. Keep the limits visible. Do not promise a universally healthy home or prevention of illness from a product feature or rating.

For product documentation, contact Mar-Hy with the exact equipment and the specific application question. An informative IAQ discussion connects a defined concern to supported functions and a maintainable plan.

PROSTOCK AT MAR-HY

PROSTOCK PROFESSIONAL QUALITY HVAC PARTS AND SUPPLIES

Mar-Hy Prostock HVAC parts and supplies store in Milwaukie

Support for the next service call.

Mar-Hy Distributors adopted the Prostock concept to enhance our support of local HVAC contractors. Since opening our Prostock store, we have received positive feedback from contractors on how they have improved response time to their customers. Our HVAC contractors have been able to stay ahead of the competition with access to our extensive inventory of Prostock Parts.

Quality parts. Contractor support.

Our Prostock replacement parts department is committed to improving the business of our HVAC contractors by providing quality services, competitive pricing, and products and supplies that earn customer trust and build lifetime customer satisfaction. We value our contractors and will continue to provide top of the line service for all of your HVAC needs.