Skip to main content

Call Us: Oregon and SW Washington: (503) 353-0100: Contact Us | Business Hours: 7:00 AM to 5:00 PM Mon-Fri

Training & careers / MAR-HY ARTICLES

Teach HVAC Efficiency by Following the Energy Through the Job

Originally published January 25, 2025
Updated November 5, 2026 4 min read

A useful efficiency lesson helps technicians explain where energy enters a system, where useful heating or cooling is delivered, and which installation or operating conditions affect the result. Begin with those relationships, then connect them to the exact equipment, safe work practices, and verification the team needs.

Define the learning result in observable terms

Instead of asking staff to “learn green technology,” choose a result such as distinguishing power from energy, explaining why a heat pump’s output can exceed its electrical input, or identifying which installation evidence supports a performance claim.

Keep the scope manageable. A technician may understand the heat-transfer principle yet still need instruction on a specific control sequence or test method. Another may know the product procedure while confusing a rating with a customer’s annual energy use. Assess the actual gap.

OSHA’s education guidance emphasizes role-specific learning and understandable language. Use qualified instruction and appropriate supervision for practical work; an energy exercise does not authorize equipment adjustments or replace required task training.

Teach power and energy with a simple example

Power describes a rate of energy transfer or use. Energy describes the amount over a period. In an invented steady example, equipment consuming 2 kW for three hours uses 6 kWh of electricity. A brief power reading is therefore not the same thing as a whole-day energy total.

Ask learners to explain what would happen if the input varied. They need interval information or an appropriate measurement method to find the total; multiplying one moment’s reading by an entire day can produce a misleading estimate.

Make the boundary explicit. Does the input include only a compressor, the complete indoor and outdoor system, auxiliary equipment, or another set of loads? Two numbers cannot be compared meaningfully if they describe different boundaries.

Explain heat movement rather than an impossible efficiency claim

DOE’s heat-pump explanation describes transferring heat rather than generating all useful heat from the electrical input. That makes the output-to-input relationship different from a simple electric resistance conversion.

Extend the invented example: if the system delivers 24 kWh of useful heat while consuming the stated 6 kWh of electricity over the same boundary and period, its simplified heating coefficient of performance is four. The calculation is 24 divided by six.

The remaining heat is transferred from the source within the simplified model; the system is not creating energy from nothing. Ask learners to draw the input, transferred heat, and useful output. This exposes whether they understand the mechanism rather than merely remember a ratio.

Keep the limitations visible. This is not a model’s published rating, a seasonal prediction, or a guarantee at every outdoor condition. Use actual manufacturer performance information and appropriate methods for real equipment.

Connect the lesson to installation quality

ENERGY STAR’s quality-installation overview identifies sizing, airflow, refrigerant charge, and duct evaluation as relevant to comfort and performance. Turn those areas into questions about the actual evidence, rather than a generic instruction to install more efficient equipment.

In a hypothetical lesson, two teams receive identical equipment data but different job records. One record documents the applicable checks and conditions; the other says only “running.” Ask which performance statements each record can support and what remains unknown.

The intended answer is not that the first job must be perfect. It is that evidence makes a result assessable, while a successful start alone cannot establish every relevant installation condition. Qualified people must interpret the actual measurements against the applicable requirements.

Practice an explanation a customer can understand

Suggested efficiency-teaching exercises
ConceptExerciseEvidence of understanding
Power and energyExplain a power reading and a period total.Uses the correct units and identifies the time basis.
Heat transferDraw the simplified heat-pump energy path.Separates electricity input, source heat, and useful output.
Rating and actual useReview a proposed annual-savings statement.Identifies missing building, weather, operation, and price assumptions.
Installation evidenceCompare two prepared job records.Explains what each record establishes and what it does not.

Follow the classroom exercise with supported practice

Choose an appropriate later job and ask the learner to explain the relevant energy boundary and evidence under the required supervision. Do not introduce an improvised equipment experiment merely to make the lesson memorable.

Review the reasoning and correct misunderstandings before adding more topics. Keep refrigerant impact, emissions, and utility cost separate from the equipment’s energy ratio; each needs additional information.

When a skill goal requires equipment-specific instruction, compare it with the current Mar-Hy training schedule. Ask for course scope and prerequisites, then provide time to apply the learning through supported work.

PROSTOCK AT MAR-HY

PROSTOCK PROFESSIONAL QUALITY HVAC PARTS AND SUPPLIES

Mar-Hy Prostock HVAC parts and supplies store in Milwaukie

Support for the next service call.

Mar-Hy Distributors adopted the Prostock concept to enhance our support of local HVAC contractors. Since opening our Prostock store, we have received positive feedback from contractors on how they have improved response time to their customers. Our HVAC contractors have been able to stay ahead of the competition with access to our extensive inventory of Prostock Parts.

Quality parts. Contractor support.

Our Prostock replacement parts department is committed to improving the business of our HVAC contractors by providing quality services, competitive pricing, and products and supplies that earn customer trust and build lifetime customer satisfaction. We value our contractors and will continue to provide top of the line service for all of your HVAC needs.