← Back to Prostock / Daikin
DAIKIN AT MAR-HY DISTRIBUTORS
Daikin ductless.
More ways to fit the job.
One room, several zones or a layout that calls for something different. Bring the plan to Mar-Hy and explore Daikin equipment that gives you more ways to deliver heating and cooling.
OTERRA® SINGLE-ZONE HEAT PUMP
MORE THAN A HIGH-WALL ANSWER
More zones. More indoor-unit choices.
Explore a two-zone outdoor unit, wall-mounted indoor choices and a floor-mounted alternative. These are separate selection paths; approved combinations depend on equipment family and refrigerant.
MXM two-zone outdoor unit
Two rooms, one outdoor unit. Start a multi-zone design with the MXM platform, then choose approved indoor units and check the connected-capacity limits for the rooms being served.
MXM three-zone outdoor unit
Bring another room into the system plan. Check the approved indoor-unit combination, connected capacity and piping requirements for the three-zone MXM platform.
MXM family image shown.
FTXV wall-mounted indoor unit
A high-wall option for the multi-zone room plan. Keep the floor clear and bring conditioned air into the space with an indoor unit selected for the room load and approved outdoor combination.
CTXV compact-capacity indoor unit
Smaller rooms deserve their own equipment choice. This lower-capacity wall-mounted option belongs in the conversation when a larger indoor unit would be a poor starting point.
FTXV 12,000 Btu/h indoor unit
A high-wall indoor option for a room that calls for a larger capacity than the 7,000 or 9,000 Btu/h selections. Confirm the room load and approved outdoor combination.
FTXV family image shown.
FVXS floor-mounted indoor unit
A different answer when a high-wall unit does not suit the space. The floor-mounted FVXS offers a low-wall installation path, with service access and clearances planned into the room layout.
Indoor units are components, not complete systems. Confirm the outdoor match, connected capacity and required controls before ordering.
DAIKIN VRV | EQUIPMENT FOR THE PROJECT
More spaces. More ways to build with VRV.
Start with the building, then choose how to serve each space. Explore Daikin VRV outdoor equipment, wall-mounted units, ceiling cassettes and concealed ducted options, with Mar-Hy behind the equipment selection.
VRV IV-S outdoor heat pump
A compact outdoor starting point for a VRV IV-S job. Have Mar-Hy check the indoor combination, piping and controls for the application.
Legacy VRV IV-S generation. Family image shown.
Wall-mounted VRV indoor unit
Bring VRV into individual rooms with a high-wall indoor unit. Select it for an approved R-32 system and plan the controls with the room layout.
R-32 platform. Family image shown.
Round-flow ceiling cassette
Explore a ceiling-mounted option for open spaces. Confirm the required decoration panel, ceiling clearance and system combination before ordering.
R-410A platform. Family image shown.
Concealed ducted VRV unit
Keep the indoor equipment above the ceiling and serve the space through ductwork. Review available static pressure, return air and service access.
R-410A platform. Family image shown.
These selections span R-32 and legacy R-410A platforms; they are not a matched system. Confirm the equipment generation, approved combinations, controls, required accessories and availability with Mar-Hy.
THE DETAILS THAT COMPLETE THE INSTALL
Controls, connections and condensate protection.
Plan the control and drainage details while the equipment is being selected. These Daikin accessories serve specific models and applications; confirm the indoor unit, controller and required interface before ordering.
Wired-control interface adaptor
An interface adaptor for supported Daikin indoor-unit and wired-controller combinations. Check the exact model and required controller.
Navigation wired controller
A wall-mounted controller for compatible Daikin systems. Confirm the equipment generation and supported functions for the selected unit.
Remote-controller cable
Complete a compatible wired-control installation with the specified controller cable. Check the controller and interface requirements.
Plan for condensate overflow protection. Explore the DACA-CFS1 electronic overflow switch → Manufacturer data sheet →
THE EQUIPMENT. THE PARTS. THE WHOLE JOB.
Put Mar-Hy behind the whole job.
Pick up the tools, service parts and installation supplies alongside the equipment. Explore Prostock for useful products, then head into the online store to order.
Milwaukie pickup · Delivery across our Oregon and Southwest Washington service region. See our service region.