← Back to Prostock / Ruud
RUUD AT MAR-HY DISTRIBUTORS
Ruud equipment & parts.
Start the next job here.
From a furnace changeout to a commercial rooftop, bring the job to Mar-Hy. Explore selected Ruud equipment, build the system around the application, and get the parts and contractor support behind it.
ULTRA® SIDE-DISCHARGE HEAT PUMPS
More flexibility for the replacement job.
RD18AY family image shown.
FOR THE REPLACEMENT QUOTE. FOR THE NEW INSTALL.
Ruud equipment for the next quote.
From space heating and cooling to heat-pump water heating, these selected Ruud products give you useful options for the next replacement or new installation.
RD18AY side-discharge heat pump
A different footprint for the central heat-pump job. The Ultra side-discharge platform supports compatible communicating and conventional 24V system applications, giving you more ways to approach replacements and dual-fuel projects. Confirm the indoor match and required controls.
RD18AY family image shown.
RD18AY 3-ton side-discharge heat pump
Another size for the side-discharge quote. Explore the 3-ton RD18AY for compatible central heat-pump and dual-fuel applications. Confirm the indoor match and required controls before selecting the system.
R962V two-stage gas furnace
A step up for the replacement quote. Two-stage heating and a constant-CFM motor give you more to offer than a basic single-stage furnace. This 60,000 Btu/h model is part of the four-way multi-position R962V family.
R951T single-stage gas furnace
A practical furnace option for the replacement quote. Single-stage heating, constant-torque airflow and a four-way multi-position cabinet give you another way to build around the application.
RP14AY heat pump
Heating and cooling from the same outdoor unit. The RP14AY brings the Endeavor platform to central heat-pump jobs, with a protected cabinet and service access designed around the work inside. Build the quote around an approved indoor match.
R801T downflow gas furnace
A straightforward option when the job calls for an 80% downflow furnace. Constant-torque airflow, direct-spark ignition and a seven-segment diagnostic display keep the offer focused on practical heating and service features.
RA13NY central air conditioner
A single-stage cooling option for Northern-region installations. The Endeavor cabinet puts protection and service access up front. Select the indoor coil, airflow and approved system combination for the job.
RA13NY family image shown.
Ultra hybrid heat-pump water heater
Bring water heating into the upgrade conversation. This tank-style hybrid uses heat from the surrounding air to heat water, with electric backup. Plan for the installation space, airflow, condensate drainage and electrical supply. RU375-30 is the version without LeakGuard.
For heating and cooling systems, confirm the approved equipment combination and AHRI rating. Water-heater selection and installation requirements are separate.
THE SERVICE SIDE OF RUUD
Keep the repair moving.
Furnace controls, blower motors and the small parts that matter on a service call. Start with these selected Ruud and Protech parts, or send our parts team the equipment model and serial number for help finding the right replacement.
Furnace control board
A replacement control for compatible furnace models. Match the equipment model and existing board before ordering.
Blower motor
A four-speed, 1075 RPM blower motor for compatible applications. Check the motor, mounting and capacitor requirements.
Flame sensor
A flame-sensing replacement for compatible equipment. Verify the part number and mounting arrangement for the furnace.
Two-pole contactor
A Protech contactor for compatible equipment. Confirm the pole count, coil voltage and electrical rating.
Pressure switch
A replacement pressure switch for compatible equipment. Match the furnace model, switch specification and tubing arrangement with our parts team.
Parts are selected by equipment model and serial number. These examples are not a parts list for every unit shown above.
TAKE RUUD TO THE COMMERCIAL JOB
Commercial equipment. More ways to quote the job.
From a small packaged-unit replacement to a larger rooftop job, explore selected Ruud gas/electric units and packaged heat pumps. Find an equipment starting point here, then work through the application with Mar-Hy.
5-ton gas/electric packaged unit
Bring gas heating and electric cooling into the commercial replacement quote. Match power, heat requirements, airflow and the existing curb.
RGECYB family image shown.
7.5-ton gas/electric packaged unit
Move into a larger rooftop application with the RGEDYB platform. Start with the existing equipment and the job requirements.
RGEDYB family image shown.
10-ton gas/electric packaged unit
A larger-capacity gas/electric option for the commercial proposal. Work through the electrical, heating and curb details with Mar-Hy.
RGEDYB family image shown.
3-ton packaged heat pump
Explore a packaged heat-pump option for compatible commercial applications. Confirm the heating duty, electrical supply and required accessories.
Need a smaller gas/electric unit? Explore the 3-ton RGECYB036ACT07BAAAA0 →
Replacing a rooftop? Bring the existing model and serial number, voltage and phase, curb dimensions and project requirements. Our commercial team can help work through the replacement and accessories.
THE CONTROL IS PART OF THE OFFER
Finish a compatible smart system with EcoNet®.
The EcoNet 800 Series thermostat puts a touchscreen at the center of compatible Ruud smart equipment. Add controls to the equipment conversation while the system is being selected, so the finished job works together.
UETST800SYS · EcoNet 800 Series Smart Thermostat
THE EQUIPMENT. THE PARTS. THE WHOLE JOB.
Put Mar-Hy behind the whole job.
Pick up the tools, service parts and installation supplies alongside the equipment. Explore Prostock for useful products, then head into the online store to order.
Milwaukie pickup · Delivery across our Oregon and Southwest Washington service region. See our service region.