Mar-Hy Distributors / Contractor equipment
Build a better heat-pump proposal with equipment families, model references and the documents to support your selection. Mar-Hy supplies HVAC contractors in Oregon and Southwest Washington from Milwaukie.
Start with the application
A ducted changeout, one-room addition and multi-zone project call for different equipment packages. Use these starting points, then check the full model and manufacturer combination data.
| Application | Families to review | Selection work to complete |
|---|---|---|
| Ducted equipment proposal | Ruud RD18AY, RD16AY or RP14AY; Friedrich Breeze Select | Indoor equipment, airflow, controls, electrical supply and the approved application. |
| A single room or defined zone | Daikin AURORA, ATMOSPHERA, OTERRA or ENTRA; Friedrich Floating Air Pro or Select | Room load, indoor placement, outdoor design conditions and the exact listed pair. |
| Multiple indoor zones | Daikin MXM; Friedrich Floating Air Pro X multi-zone | Each zone’s load, approved indoor mix, corrected capacity and piping limits. |
These are application starting points, not interchangeable equipment combinations or live stock listings.
Ruud / Heat-pump equipment
Compare central split-system and side-discharge families, then check the indoor equipment, electrical service and control plan that complete the job.
Explore Ruud equipment through Mar-Hy
Side-discharge heat pump
Start with the outdoor footprint, indoor equipment and control plan. Our RD18AY reference puts model dimensions, electrical data and selection documents together.
Four full outdoor models are covered on the family page.
Model reference: RD18AY36AJVCA. Confirm current price, availability and the complete equipment combination.
Side-discharge heat pump
A side-discharge option to evaluate when planning equipment placement. Check the complete model, required clearances, indoor equipment and controls before quoting.
Model reference: RD16AY24AJVCA. Confirm current price, availability and the complete equipment combination.
Central split-system heat pump
A central-system option for a ducted equipment proposal. Compare the selected capacity, electrical supply, indoor coil or air handler and control requirements.
The 1.5-ton model is single-stage; the cited series specification identifies larger listed sizes as two-stage.
Model reference: RP14AY24AJ2NA. Confirm current price, availability and the complete equipment combination.
Daikin / Heat-pump equipment
Start with the rooms, loads and indoor-unit styles. Then compare outdoor models, approved combinations, piping limits and the heating data for the application.
Explore Daikin equipment through Mar-Hy
Multi-zone heat pump
Plan several indoor zones around one outdoor unit. Use approved indoor combinations and corrected capacity data to build the equipment package.
Our family page covers three full outdoor models and explains connected-capacity and piping checks.
Model reference: 2MXM18AVJU9. Confirm current price, availability and the complete equipment combination.
Single-zone heat pump
Review the RXT outdoor and FTXV wall-mounted indoor references for a single-zone proposal. Use the exact listed combination and its heating data for the design conditions.
Model reference: RXT12AVJU9. Confirm current price, availability and the complete equipment combination.
Single-zone heat pump
Evaluate the RXM outdoor and FTXM wall-mounted indoor family for a room or defined zone. Keep the full model suffix and generation together when selecting literature.
Model reference: RXM12WVJU9. Confirm current price, availability and the complete equipment combination.
Single-zone heat-pump models
Use the RXF outdoor and FTXF indoor heat-pump references. The wider OTERRA brochure also includes cooling-only products, so confirm the actual equipment type.
Model reference: RXF12BVJU9. Confirm current price, availability and the complete equipment combination.
Single-zone heat pump
Review RXC outdoor and FTXC wall-mounted indoor references for a single-zone installation. Confirm the approved pair, power supply and installation limits.
Model reference: RXC12BVJU9. Confirm current price, availability and the complete equipment combination.
Friedrich / Heat-pump equipment
Compare Breeze Select ducted references with Floating Air single-zone and multi-zone families. Keep each product line, model suffix and indoor combination distinct.
Explore Friedrich equipment through Mar-Hy
Ducted heat pump
Plan the outdoor unit and ducted indoor application together. Our Breeze reference covers cabinet dimensions, listed air-handler references and the documents needed for the quote.
Use the exact indoor application and approved controls; a shared nominal size does not establish compatibility.
Model reference: WFPU17Y243D. Confirm current price, availability and the complete equipment combination.
Single-zone ductless heat pump
Begin with the FPHSR outdoor model and its listed indoor unit. Match the model generation, voltage and refrigerant shown in the manufacturer documents.
Model reference: FPHSR12A3D. Confirm current price, availability and the complete equipment combination.
Multi-zone ductless heat pump
Build the proposal around each zone and the complete approved indoor combination. Check connected capacities, piping limits and the required accessories.
Model reference: FPHMR27A3D. Confirm current price, availability and the complete equipment combination.
Single-zone ductless heat pump
Start with the full FSHSR outdoor reference and the matching indoor documentation. Confirm electrical requirements and the complete system rating for the selected pair.
Model reference: FSHSR36B3D. Confirm current price, availability and the complete equipment combination.
Sell it. Select it. Document it.
Use a customer brochure for the sales conversation and the model-specific technical documents for dimensions, electrical requirements and installation planning.
Search the Mar-Hy equipment document libraryCheck the complete outdoor and indoor equipment record. A family name or outdoor model alone does not establish a system efficiency rating or incentive eligibility.
Find heat-pump AHRI matchup referencesPrepare the installation and service team with the applicable manufacturer instructions and relevant hands-on training.
View upcoming Mar-Hy contractor classesFind it at Mar-Hy
Equipment price matters. Compare the whole package—including indoor equipment, controls and required accessories—so the quote reflects the work you will actually install.
Send the model numbers and project details, or talk through the application with our team.
Use the rating for the complete listed equipment combination. A product family’s maximum does not describe every capacity or indoor pairing. Compare the same rating metric and check the applicable AHRI record.
Confirm the load, indoor equipment, available airflow, electrical supply, controls and installation requirements. A matching nominal tonnage does not establish equipment compatibility or the delivered heating capacity at design conditions.
Record the load and indoor-unit choice for every zone. Use the outdoor model’s approved combinations and corrected performance data, then verify connected-capacity and piping limits. Several indoor nameplate capacities cannot simply be added to promise simultaneous output.
Use the family links above or search the Mar-Hy document library by full model number. Keep the model suffix, refrigerant generation and document revision together when selecting a technical reference.
This page previously featured the UP20. For existing equipment, start with the full model and serial number, then use Ruud’s UP20 manufacturer reference or search UP20 literature in the Mar-Hy library. UP20 is retained here for legacy service reference rather than featured as a current equipment offering.
Ask Mar-Hy about UP20 service parts or replacement equipment.
For HVAC contractors and trade purchasers. Family images are representative manufacturer artwork. Model references help locate equipment information; confirm current price, sourcing, availability and the complete application with Mar-Hy. Follow the manufacturer instructions for the exact equipment.